Stainless steel pipe fittings installation precautions

- Aug 08, 2018 -

The stainless steel pipe fittings adopt high flat pipe joints, which have high requirements on the quality of the pipe. The outer diameter ellipse of the cast iron pipe, the wall thickness and the physical function of the rubber ring have high requirements. Because of the poor watertight function of the flat mouth, the pipe is strictly controlled. In addition to the mass of the pipe and other parts, the high-pressure flange should pay special attention to the port maintenance of the pipe and pipe fittings, and the ellipticity and flatness of the welded elbow pipe port. The installation should be carried out in strict accordance with the operating procedures. In particular, in the straight pipe installation, the riser pipe is required to fix the riser to the load-bearing wall of the building at the interface of each pipe; the horizontal pipe should be provided with a hanger at each interface to connect the sanitary fittings. In a more concentrated toilet room, if the two interfaces of the horizontal branch pipe connecting the sanitary ware are not more than 600 mm apart, a hanger can be arranged at the center.

The seamless stainless steel pipe is a long strip of steel with a hollow section and no seams around it. The thicker the wall thickness of seamless stainless steel pipe fittings, the more economical and versatile, and the thinner the wall thickness, the higher the processing cost. The pipe has a hollow cross section and is a pipe for retaining fluid, which is used to transport natural gas, oil, gas, and water to certain solid materials. Compared with solid steel such as round steel, seamless stainless steel pipe fittings are lighter in weight when they have the same bending and torsional strength. They are economical sections of steel and are used in the manufacture of structural parts and mechanical parts, such as some construction tops. Steel scaffolding, bicycle racks, car drive shafts, oil drill pipes, etc.


  • 90 Orfs Female Flat Seat
  • Stainless Steel 90° Female Pipe Elbow
  • 90° Straight Thread Hose Fitting
  • 90° Jic Swivel Elbow
  • Adjustable Stud Branch Tee
  • 90° Adjustable Stud Elbow

Related Products