Precautions for installation of high pressure hose joints

(1) When the hose is moving or stationary, it should not be bent excessively, nor should it be bent at the root, but should be bent at least 1.5 times its diameter;

(2) When the hose is moved to an extreme position, it should not be pulled too tightly and should be loose;

(3) Try to avoid torsional deformation of the hose;

(4) The hose is allowed to be far away from the heat radiating components, and it is necessary to install a heat shield;

(5) Avoid external damage to the hose, such as long-term friction on the surface of the same component during use;

(6) If the hose's own weight causes excessive deformation, there should be support parts.