News

Advantages Of JIC Fittings

JIC fittings are very similar to Army-Navy fittings but with a lower tolerance and therefore are produced at a lower cost. Commonly made out of steel & stainless steel, the braided hoses makes ...

JIC Hydraulic Hose Reducer

JIC hydraulic hose reducer are widely used in fluid applications such as the delivery of fuel or hydraulics, especially when a higher PSI is involved. The JIC hydraulic hose reducer uses its 37-deg...

WHAT ARE THE MAIN PROPERTIES OF WELD ON FITTINGS?

Weld on fittings are a type of hydraulic fittings in which a pipe is inserted into a recessed area of a fitting, valve, or flange. Unlike butt weld fittings, weld on fittings are mainly used to sma...

What Are Hydraulic Hose Swivels?

Swivel-type fittings are designed to allow the coupling and hose connection to rotate, which prevents twisting, kinking and excessive bending. That can extend hose life and reduce maintenance needs...

Beaded Hose Stem Fittings/Hose Barb Fittings

Installation step: 1. Inspect components for damage or contamination. 2. Install hose clamp(s) on hose. 3. Lubricate hose l.D. if permissible. 4. Install hose to fitting. 5. Following hose and clam...

Hydraulic Tee Adapter

Hydraulic tee adapter connect three flow sections in a T-shaped intersection. This allows fluid flow to be combined or split apart, which provides for a smooth and effective fluid transition betwee...

ORFS Thread Fittings Introduction

Orfs thread fittings meets or exceeds the strict requirements of SAE J1453 and ISO 8434-3. It is an O-ring face seal type fitting that consists of a nut, a body, an O-ring and a sleeve. When the fi...

SAE Straight Thread (ORB) / SAE Straight Thread O-Ring

This fitting is also known as O-Ring Boss (ORB) Recommended by the NFPA for optimal leakage control in medium and high pressure hydraulic systems. The male fitting has a straight thread and O-ring....

Hydraulic Equipment Precautions

Oil tank wall material or paint should not be changed to oil pollution source all the time. It is better to use stainless steel as the fuel tank material of hydraulic control system.