How to deal with the leakage of American transition joint?

　　When using American Transition joints, leakage is a troublesome thing. Today, the editor will explain to you the causes of leakage and how to deal with it once leakage occurs.

　　The first is high pressure. If the product leaks within a few days, most of it is caused by improper use of seals. Most of the time, the joint will have glyd ring or sitefeng to strengthen its sealing performance. The general sealing element cannot achieve the effect of high-pressure sealing, and the human body Leaks. In addition, during the use, if the force is too strong, resulting in seal dislocation, damage, etc., resulting in leakage. Secondly, the high temperature causes the leakage of the American transition joint. If the medium temperature in the joint is too high, the sealing element will be damaged, causing leakage, this requires users to choose the appropriate connector model and type according to the product's medium.

　　In addition, failure to tighten will also lead to leakage. Most American Transition joints are tightened by threads. If the tightening degree is not firm enough during tightening, leakage will naturally occur, if necessary, you can use a wrench to tighten it, but remember to tighten it too tightly to avoid damage to the SEALs inside.