The strength of the high-pressure rotary joint will shorten the service life

How to install the high-pressure rotary joint with the metal soft is a problem that many customers consult. The high-pressure rotary joint adopts a relatively high environmental pressure, and the metal hose can be compressed and stretched. But if it is not installed correctly, it will be damaged.

There are many installation sequences of rotary joint accessories in the online information, and the metal hose plays the role of compensation connection in the high-pressure rotary ring. There are three types of metal hose lengths. The compression length is the length that compresses the hose to a position where compression cannot continue. The installation length is the displacement of the high-pressure rotating ring. Half of the length, the length of the pipe is in the middle, and the extension length refers to the length of the pipe that cannot be extended.

In order to install the metal hose according to the actual situation, sometimes the high-pressure rotary joint is in the middle position when installing the metal hose. This position of the hose should bear the axial load in two directions of movement, otherwise it can only move in one direction, which will have a negative impact. The strength of the high-pressure rotary joint will shorten the service life.