How to maintain the British transition connector?

1. We need to check the appearance of the British transition joint, whether before or after installation, we need to carefully check it. The more intuitive inspection content is the appearance of the product, mainly checking whether the surface is curved, scratched or defective, which is very important for future use.

2. Check whether there is dirt in the British transition joint. If dirt or blockage is found, clean it up in time so as not to affect the service life. After the inspection, tighten the joint to avoid leakage, loosening and other problems.

3. In order to ensure that the British transition joint does not leak during use, the sealing ring should be replaced frequently. When selecting the sealing ring, attention should be paid to its outer diameter and thick section. The elasticity of the sealing ring should be good, and there are no problems such as aging and deformation.

4. The use environment of British transition joints is required. During maintenance, attention should be paid to keep them away from flammable and explosive areas, metal chips and sand and gravel areas, do not use it under the condition of exceeding the temperature it bears, avoid deformation and leakage of the seal, and do not use fluid suitable for other fluids.